Cleaning Mahlkönig Vario

The little Mahlkönig grinder needed te be cleaned as it hadn't been for a few months. I'm playing with the idea to have it modified and if I take it to a workshop, it should not be clogged up with coffee grounds.

The grinder standing up (note the ugly smoke-dark seventies look of the hopper):


Lying down, hopper and top burr taken off:

The burrs after a bath -- screws on the left burr need a scrape still:


The grinder beneath the lower burr before and after the vacuum cleaner:




The micro switch that 'feels' if the hopper is in place. If I replace the ugly hopper, I need to make sure the switch is still on:


Lower burr re-installed:


Upper burr tightened in as well:






Reacties

Populaire posts van deze blog

Finished Pavoni & Fuji PXG4 pid: Probe Inside the Ring

Tiny Cheap Fluid Bed Roaster by Tije and Jan

TC4+ boards and Arduino controlled roaster by Matthias Gerstgrasser