Roasting @3aans funnymix

-
Adriaan sent me a mix of beans to roast. They're a wildly varied bunch! The top row of the picture below didn't get to play along but the bottom row was still all over the place, from peaberries to giants.
Floaters, peaberries, giants and hollw ears
 Still they turned out well, visually:
Can't wait to try them sometime next week, or later
 Of the roasted ones, a bunch didn't make the cut, like the ones outside the bag here:
The roast profile, recorded my Artisan, the free software for coffee roasters:

Reacties

Anoniem zei…
Deze reactie is verwijderd door een blogbeheerder.
30 juli 2014 om 08:48
Een reactie posten

Populaire posts van deze blog

Lose Weight, Gain Volume: About Coffee Bean Density in Artisan

-
Afbeelding
Roasting coffee beans, you want to be as consistent as you can, replicating a successful roast while collecting enough data (besides what you see, feel, smell and taste from the coffee) to get an idea what you may be doing wrong if the results are not so good all of a sudden. The Artisan software  for coffee roasters has a feature to help you keep track of volume and density of your beans. Density is a word for the weight of a certain volume of beans and it can be measured in grams per liter. Your green beans are obviously more dense than the roasted beans: roasted beans have grown a lot in size and they have lost weight (moisture) in the process. In his new book “ The Coffee Roaster’s Companion ”, the famous Scott Rao explains these things:  “Ideally, water should account for 10.5%-11.5% of green-coffee weight.” (p.3) “Coffee loses 12-24% of its weight during roasting, depending on initial moisture content, roast degree and inner-bean development during roasting. T...
Meer lezen

Tiny Cheap Fluid Bed Roaster by Tije and Jan

-
Afbeelding
(also see Daily Coffee News feature ) Tije designed and made the following structure for a tiny and cheap fluid bed roaster, to which Jan van der Weel added the Arduino parts, electronics and programming: Sketch by Tije de Jong Jan sourced a very cheap blower (€ 11) to start with, Tije developed and constructed the mechanics, Jan built together and programmed the TC4 / SSR electronics.  On his blog, Jan will specify exactly how the TC4 part is combined and programmed and I will copy these details into this blog entry, just as Jan will use this video in his blog. We did a few test roasts to make sure it works at all and it does. Towards the end, the first roast tended to get a flat BT line and airflow was slightly decreased. 200g seems max load of green beans. Second roast a little more power was given to the heater. Next we will try the Background Roast driven by the PID software of Artisan. A week later, with updated software that works better to change the...
Meer lezen

The Four Daltons

-
Afbeelding
COMPAK models R120, E8, E6 and E5 lined up next to LONDINIUM L-R First impression, notes after a visit from Roemer Overdiep: Roemer came over to taste espressos from all 4 grinders. We made sure to every time have 18g in the 18g VST basket, using the distribution tool, getting about 30g of espresso in about 30s. R120 was best, E8 ‘redspeed’ almost as good, the E6 and E5 were somewhat similar in that the espresso was excellent but in comparison with E8 / R120 it has more ‘sharpness’ — the R120/E8 were softer, more subtle. If someone has excellent beans, an excellent espresso can be prepared with the E5 and only if one also has the bigger E8 nearby would one notice there might be something extra in buying the bigger grinder. Difference between E5 and E6 seems minimal. These tests were done with a first roast of Kenya beans. We poured the beans from the hopper of one grinder to the other while testing and gradually the hippers got emptier. Data about these 4 different sizes gri...
Meer lezen